Who paving and hardscaping suits in Perth
Paving in Perth suits yards where a patio, path or pool surround would make the space usable, or where old pavers have sunk, lifted or rocked underfoot. A good job sits level, drains away from the house and suits how your family actually uses the outdoor area.
Picturing the finished outdoor area
Picture a patio that stays flat under the outdoor table, a path that does not puddle after winter rain and a pool surround that feels comfortable for bare feet. Hardscaping ties these together with steps, edging and level changes so the whole yard works as one space.
Why the base matters on Perth sand
Sunken pavers usually trace back to the base. On Perth sand, the ground is compacted, then a bedding layer is screeded level before laying. Edges need restraint so the sand does not wash out, and the surface should fall gently so water runs away from walls and doors.
Drainage and machine access
Ask where the water will go: into the garden, a soak well or a drain. Then check access. A bobcat needs a clear path into the yard, while a narrow side gate can mean barrow work, which changes labour and timing in the quote.
Pavers, stone or concrete: the material decision
Choose by use, look and heat. Pool surrounds want a surface that stays cooler and less slippery when wet. Entertaining areas often suit larger format pavers, while paths can use smaller units that handle curves. Ask to see samples in sunlight before you commit.
Next step for your paving quote
You can request a quote here and a licensed and insured local contractor can follow up. To make quotes compare fairly, mark the area with a hose, pace it into square metres and note your suburb, the surface you want and any old paving to lift.
Paving and Hardscaping Services We Offer
✓Patios and Outdoor Entertaining Areas
Level areas for a table, barbecue and seating, set out to fall away from the house.
✓Paths and Garden Walkways
Narrower runs linking the gate, clothesline and garden, often with curves and steps.
✓Pool and Spa Surrounds
Paving around pools and spas chosen with wet feet, summer heat and coping lines in mind.
✓Paver Relaying and Repairs
Lifting sunken or lifted pavers, fixing the base underneath and relaying sound units.
How it works
- 1
Check the area
Look at where the old paving dips, where water sits after rain and how you get into the backyard.
- 2
Choose the surface
Decide on pavers, stone or concrete for how the area is used, and note whether it meets a pool, lawn or garden bed.
- 3
Compare the scope
Read each quote for base depth, drainage, edging, removal of old paving and access assumptions so the numbers line up.
- 4
Prepare and lay
The ground is excavated and compacted, the bedding is screeded to fall, then the surface is laid, cut and edged.